FUN TEST - Get Up To Date

[AToW.DaMan]

You will need to install the following 3 programs.


Arma Public Beta Patch 1.15 (http://community.bistudio.com/wiki/ArmA_Beta_Patch_1.15)
A.C.E. Public BETA v1.01 (http://www.acemod.net/pub/ACE-ArmA_Mod_v1.01full.exe) (648MB) [Available]
OR if you have v1.0 installed then update using A.C.E. Public BETA Patch v1.01 (http://www.acemod.net/updates/ACE-ArmA_Mod_v1.01update.exe)(333 MB) [Available]
AToW-MOD-Beta_v2.29full.exe (http://www.arma-tow.com/downloads/AToW-MOD-Beta_v2.29full.exe) (254MB) [Available]
-or-
Run your 'atow-updater.exe' in '@AToW-Mod-Beta\tools'
Once patched to v.2.29 run 'atow-updater.exe' again to patch to v2.30



As a result of the BI released Arma Public Beta Patch 1.15 (http://community.bistudio.com/wiki/ArmA_Beta_Patch_1.15) has fixed some MP issues. You will need to install this Beta Patch.
A.C.E. Public BETA v1.0 (http://www.arma-tow.com/forums/showthread.php?t=9838)
Then
A.C.E. Public BETA Patch v1.01 (http://www.arma-tow.com/forums/showthread.php?t=9932) (333 MB) [Available]

Next install the latest AToW MOD Beta - ACE Edition

AToW-MOD-Beta_v2.29full.exe (http://www.arma-tow.com/downloads/AToW-MOD-Beta_v2.29full.exe) (254MB) [Available]
-or-
Run your 'atow-updater.exe' in '@AToW-Mod-Beta\tools'
Once patched to v.2.29 run 'atow-updater.exe' again to patch to v2.30

YOMA is no longer available.

Your Mod line in your shortcut needs to be in the following order. Keep it the same order.

The recommended shortcut line is now
-mod=@ACE;@AToW-MOD-Beta;beta

If you used the full setup program listed above you should have shortcut already prepared for you.

DaMan.

[[UN]SGen.ViperMaul]

The AToW MOD Beta - ACE Edition is ready for download.

[[UN]SGen.ViperMaul]

YOU MUST INSTALL THE LATEST PUBLIC RELEASE OF ACE 1.01

A.C.E. Public BETA Patch v1.01 Release (http://www.arma-tow.com/forums/showthread.php?t=9932)

[[DI]Pvt.Zetki]

AToW Mod Beta V2.29 released

AToW-MOD-Beta_v2.29full.exe (http://www.arma-tow.com/downloads/AToW-MOD-Beta_v2.29full.exe) (254MB)
-or-
Run your 'atow-updater.exe' in '@AToW-Mod-Beta\tools'

[[IRT]Super64]

Ok I am getting a problem after updating to 2.29 using the AToW-updater.exe. I now get: "Include file SPON_Core\SPON\Core\ui\common.hpp not found" And then there's an OK button and thats it. Launcher closes and game does not launch.

UPDATE: I can launch the game using the "Play ArmA with ACE Mod" shortcut. But not the "Play Arma AtoW Beta" shortcut. Something is bonked.

[[DI]Pvt.Zetki]

Install the latest public version of ACE v1.01 and the problem should be fixed. VM had the same problem.

[[DI]Pvt.Zetki]

Once patched to v2.29 run your 'atow-updater.exe' again to get to v2.30

[[IRT]Super64]

Install the latest public version of ACE v1.01 and the problem should be fixed. VM had the same problem.

Negative. I was running ACE 1.01. I ran both updaters again just to make sure nothing was missed. Same Error message.

Oh snap, you added that 2nd part before i could reply. I'll try that.

Once patched to v2.29 run your 'atow-updater.exe' again to get to v2.30
----

UPDATE: Ok same error. ATow @ version 2.30. ACE @ version 1.01. ArmA @ version Beta 1.15.

[[DI]Pvt.Zetki]

Try downloading http://www.acemod.net/pub/ACE-ArmA_Mod_v1.01full.exe it should fix all the problems with ACE as its a full install.

[[IRT]Super64]

Try downloading http://www.acemod.net/pub/ACE-ArmA_Mod_v1.01full.exe it should fix all the problems with ACE as its a full install.

Yup i was already downloading it. That fixed it. Strange that the updaters did not. I expect a few others to have this issue on Sunday.

[[UN]SGen.ViperMaul]

If everyone would have read post #3 above and also quoted here everything would have been fine.


YOU MUST INSTALL THE LATEST PUBLIC RELEASE OF ACE 1.01

A.C.E. Public BETA Patch v1.01 Release (http://www.arma-tow.com/forums/showthread.php?t=9932)

In that link I gave a very detailed explanation.
Now if you followed that detailed explanation then we need to know so we can change the instructions.

On Monday there will be a new all-in-one setup.exe with updater to reduce these problems.

Also we will provide YOMA sync point again for those that YOMA works well for. YOMA is also good at sniffing out problems. as well if you know how to read it.

Cheers!
:salute:

[[IRT]Super64]

If everyone would have read post #3 above and also quoted here everything would have been fine.

But that is deceiving VM. Last week I updated my ACE install to Ver. 1.01. So i thought i had met the requirements. Apparently there is a *New* Ver. 1.01. Many more will think "I have ACE 1.01, so im good to go".

[{AToW}Ghost33]

I say make it simple and type it as

"YOU MUST INSTALL ACE V1.01 AGAIN, EVEN IF PREVIOUSLY INSTALLED." :salute:

[[8]72|Pvt.SnowMan]

I say make it simple and type it as

"YOU MUST INSTALL ACE V1.01 AGAIN, EVEN IF PREVIOUSLY INSTALLED." :salute:
That makes it too easy, and as such, violates tourney rules :army_wink:

SnowMan

[[DI]Pvt.Zetki]

If you updated ACE v1.01 for last weeks battle then it will be fine, Its just if you havnt updated the week before last. Just make sure you can get in the server before we actually start!

[{7}9th|Pra.Lucan]

My beta patch isn't working. I have the line in properties as: -mod=@ACE;@AToW-MOD-Beta;beta

What's wrong?

[[UN]SGen.ViperMaul]

My beta patch isn't working. I have the line in properties as: -mod=@ACE;@AToW-MOD-Beta;beta

What's wrong?


You must give me an error message.
If error 1 I will tell you to install ACE
if error 2 I will tell you to install ATOW
If error 3 I will know what to tell you next.


Not working alone - does not help those people help you efficiently.
Report to UN Public channel. Find Zetki or myself.

:salute:

[{7}9th|Pra.Lucan]

Oh, I found the problem.

It was that the beta was not the first mod in my properties channel.

Kinda sad.